Solutions | Krome Metal Chemicals

our products and solutions

Anodising

Anodising is an electrochemical process employed to enhance the thickness of the naturally occurring oxide layer on a metal surface. Primarily used for materials like aluminum and titanium, anodising offers various benefits such as improved corrosion resistance, wear resistance, and aesthetics.

The process involves immersing the metal in an electrolyte solution, typically sulfuric acid, while applying a direct current. This prompts the flow of electrons from the metal to the electrolyte, and oxygen ions from the electrolyte to the metal. As a result, an oxide layer forms on the surface through a chemical reaction. By adjusting the voltage and duration of the process, the thickness of this layer can be controlled.

The anodised layer is highly durable and exhibits excellent resistance to corrosion and wear. Furthermore, it possesses low electrical conductivity, making it suitable for electrical insulation purposes. The porous structure of the anodised layer allows for dyeing and other decorative treatments, adding to its versatility.

Anodising is a cost-effective and efficient method to enhance both the performance and appearance of metals. Notably, it is an environmentally friendly process that eliminates the need for hazardous chemicals.

Alupress 22

ALUPRESS-22 is a highly concentrated blend of anionic and fully biodegradable surface activate agents.

Salmix AL-300

Tin Electro-Colouring Process for anodised aluminium

Aluclean 500

ALUKLEAN 500 is an aluminium degreaser which can be used for cleaning prior to etching or bright dipping without leaving an interfering film on the aluminium. It removes oil and buffing compounds without corrosion of the metal.

Aluclean Liquid

ALUCLEAN is an effective heavy duty acid based cleaner for corrosion and stain removal caused by oxidation on aluminium. It is effectively used in marine, vehicle and general industrial applications to remove road film, diesel exhaust fumes, and loose dirt and to brighten the aluminium.ALUCLEAN is also effective on all stainless steel products.

K-Soak 180

K-Soak 180 is a powdered, Non-silicate, Strongly alkaline
etch-cleaner and degreaser. It is recommended for use in immersion application only, Such as pre-mask cleaning of aluminium, where a variety of Aluminum and aluminium alloys are treated.K-Soak 180 can also be used as degreaser on metals such as cast iron, Steel, Stainless Steel titanium, Copper and brass. When using K-Soak 180 to degrease copper and brass, Care must be taken that no undesirable plating of copper occurs on metals such as ferrous bearing metals and aluminium.The surfactant Contained in K-Soak 180 is classified by the manufacturer as biodegradable.

Krome Deep Black SW805

KROME DEEP BLACK SW 805 is a solid, water-soluble dye suitable – when applied on thick oxide coatings – for colouring anodised aluminum parts that are to be used as architectural components on the outside of buildings.

Krome Mineral Gold SW-814

By using KROME MINERAL GOLD SW-814 you can obtain a gold colouring on anodized aluminum by means of a simple immersion in a ferrioxalate solution. The immersion produces a hydrolysis of the metal inside the anodic coating and gives metallic compounds with a high lightfastness and excellent stability to weathering discolouration.

Desmut K

DESMUT K is specifically developed for removal of smut from aluminium and its alloys on large anodizing installations where a variety of alloys are being processed.DESMUT K can also be used to remove resistance welding and as a post treatment for alkali cleaning and etching.

Alupress 44

A blend of surfactants for fume reduction in caustic soda, Aluminium etch baths.

Etchal AL 2000

ETCHAL AL 2000 is an almost neutral liquid product used in the Long Life Aluminium etching process. This system of etching has been preferred for many years throughout the world due to the constant finish it achieves.

Alumseal 1000

Alumseal 1000 is a liquid additive specially designed for the prevention of sealing smudge in hot water sealing of baths for anodised aluminium.Alumseal 1000 has good buffering properties that control the pH of the sealing water to a value of around 5.8. This is the optimum pH value for effective hot water sealing.

Supreme Seal CS800

The SUPREME SEAL CS 800 low temperature sealing process allows sealing of anodic oxide layers on aluminium and its alloys to be carried out at temperatures in the range of
27 – 30°C. The result is a perfect quality seal, suitable for outdoor corrosion resistance including industrial and marine environments. SUPREME SEAL CS 800 has a natural colour similar to that produced by the traditional hot sealing process.

Inhibitron AL-3000

The new INHIBITRON AL-3000 anodizing process allows you to anodize at 30°C without any evidence of superoxide formation or burning, and by retarding the dissolution of aluminium in the bath, it is possible to operate a perpetual bath system. The growth of the oxide is also faster than in the traditional bath if the cathodes are in aluminium and if the anode-cathode distance is reduced.The oxide so formed is perfectly uniform and resistant.

our products and solutions

Electroplating

Electroplating is an electrochemical process that involves the deposition of a thin, uniform layer of metal onto an electrode by utilizing an electric current. This transformative technique is employed to alter the surface properties of metals and other materials, providing benefits such as protective coatings, enhanced corrosion resistance, improved wear resistance, increased electrical conductivity, improved solderability, and aesthetic enhancements.

The process comprises an electrolyte, which is a solution containing charged ions, an anode (the electrode that releases electrons into the electrolyte), and a cathode (the electrode that accepts electrons from the electrolyte). Typically, the anode is made of a metal like copper, zinc, or nickel, while the cathode is composed of a less reactive material like stainless steel or titanium. The electrolyte contains ions of the metal to be plated, and when an electric current is applied, the metal ions are reduced at the cathode, resulting in the formation of a thin and uniform coating on the electrode's surface.

Electroplating finds applications across diverse industries, ranging from automotive and aerospace to medical and electronics. It is also employed for creating decorative finishes on jewelry, coins, and various metal objects.

Copper Sulphate High Purity

RAW

Cupri AC 510 Part A

CUPRI AC 510 is a bright acid copper plating process which produces highly levelled, brilliant, smooth and ductile copper deposits. The process is designed to produce uniform brightness at both high and low current density levels.

CUPRI AC 510 is specially formulated for decorative plating on metal wherein faster brightness can be achieved at shorter plating time. The bright copper deposit from CUPRI AC 510 bath provides an excellent undercoat for subsequent Nickel and Chromium plating on most metallic substrates. To insure good adhesion, steel parts should be completely covered with a cyanide copper or acid nickel strike prior to acid copper plating. Similarly, the Zinc die cast parts should be given a minimum thickness of 5.0 - 7.5 microns in cyanide copper bath before plating with bright acid copper bath.

Due to its outstanding levelling characteristics, the surface imperfections of the base metal are covered completely resulting in a brilliant final finish with less nickel thickness, thus reducing the overall plating cost. CUPRI AC 510 process is ideally suitable for plating on artificial jewellery components where it prepares excellent undercoat for subsequent Nickel and/or other 'Nickel-free' processes. This process can also be adopted for plating on different plate substrate such as ABS, Aluminium & it Alloys etc.

Cupri AC-510 RTU

Ammonium Chloride No-Anticaking

Ammonium Chloride with no anticaking agents used specifically in plating processes. Krome Metal Chemicals offers high quality ammonium chloride for lating uses that wil not result in excessive use of other additives. Anti-caking compounds often result in high usage of brightening systems in Acid Zinc plating. All ammonium chloride supplied by Krome Metal Chemicals is checked for anticaking compounds that would result in these adverse effects.

Oracle AZ/SB Brightener

Acid Zinc Chloride Process for Rack and Barrel Plating with Oracle AZ-SB Brightener

Oracle AZ-50 Brightener

Oracle AZ-50 bright is a brightener for acid zinc plating. It can be used in both rack and barrel systems and produces a bright clear zinc coating. Oracl AZ-50 Bright is an easy to use additive with excellent results.

Oracle AZHT Brightener

ORACLE AZHT BRIGHTENER is mild acid high-efficiency electrolyte for bright zinc plating of components on racks as well as in barrels. Fully bright zinc deposits are obtained over an exceptionally wide current density range. The corrosion resistance of the zinc deposits can be improved considerably by post-treatment in solutions from our range of post-treatment products. In addition, it is also possible to provide sealing for the surfaces.

Potassium Chloride

RAW

Potassium Chloride

RAW

K-Acid Salts

K-ACID SALTS is a heavy duty, water-soluble compound for use as a replacement for most of the commonly used plating room acids. It is used for scale and oxide removal as well as the activation of a wide variety of metals prior to electroplating.

Copper Cyanide H.P.

RAW

Cupri CNC-80

High Efficiency Additive for Cyanide Copper and Bronze Plating Processes

Caustic Soda Flakes

Caustic soda flakes are used in many different metal processes. They are mainly used to maintain the pH of the solution but also to ensure fast effective plating. Krome Metal Chemicals provides only top quality products to their clients.

Caustic Soda Pearls

Caustic soda pearls are used in many different metal processes. They are mainly used to maintain the pH of the solution but also to ensure fast effective plating. Krome Metal Chemicals provides only top quality products to their clients.

Oracle Crystal

ORACLE CRYSTAL is an alkaline non-cyanide zinc electroplating process for use in rack and barrel installations. ORACLE CRYSTAL produces bright deposits with exceptionally uniform thickness distributions. ORACLE CRYSTAL deposits can be treated with chromate conversion coatings to produce blue bright, bronze, green and black finishes. ORACLE CRYSTAL contains no chelating agents or complexors.

Blackoat Antique

BLACKOAT ANTIQUE is a unique soft oxidisation coating for vat and barrelled copper and brass components.

Blackoat B

BLACKOAT B is a unique soft oxidisation coating for vat and barrelled copper and brass components.

Brass Salts K

The Bright Brass process is designed to give a consistent yellow Brass colour on rack or barrel plated items. The replenishment from a completely blended salt ensures colour consistency and ease of operations.

Caroat Alt

Product to replace the use in caroat in the deoxidation of brass parts.

K-Prep MS-20

K-PREP 340 is a weld scale remover and enchant for use on stainless steel and similar alloys

Zinc Cyanide

RAW

Kromecoat DC-500 Plus

The KROMECOAT DC-500 PLUS plating process offers a significant improvement over Kromecoat DC-300 in coverage and resistance to burning in high current density areas. It utilizes an easily controllable, triple catalyst system. The process is specifically intended for decorative plating.

Barium Carbonate

Barium Carbonate is an additive used in Chrome plating to reduce the sulphuric acid content and restore the correct chromic acid to sulphuric ratio for operation.

Chromic Acid Lanxess

Chromic acid is the basis of chrome plating. It provides the chrome metal in the electrolyte for the plating process. It is important to have a high quality chromic acid to reduce impurities in the bath and ensure effective plating. Krome Metal Chemicals ensures only the best chromic acid is supplied.

K-Anode Kleen

KROME Metal Chemicals has developed an effective method of removing the scale that forms on a lead anode during chromium plating. This improved procedure involves the use of K-ANODE KLEEN compound and is a simple immersion treatment.

Krome Neut Salts

KROME NEUT SALTS affords a simple method of neutralizing and chemically reducing the chrome solution carried over on plated components as they are transferred from the drag-out tank after chrome plating. It has an advantage over sodium bisulphate in that it may be used in a plain steel tank. In use, it not only neutralizes any free acid remaining upon the surface of the chrome-plated articles, but also reduces the residual chromate to the green trivalent stage. KROME NEUT SALTS may also be used, very effectively, on automatic nickel and chrome plating plant for the removal of any chromic acid entrapped in jigs or absorbed by jig coatings, thus preventing chrome contamination of the cleaning line.

Kromecoat DC-300

KROMECOAT DC-300 plating process offers a significant improvement over conventional chrome systems in coverage and resistance to burning in high current density areas. The process utilizes an easily controllable triple catalyst system, and is specifically intended for decorative plating.

K-Soak 110

K-Soak 110 is especially developed for us in energy conserving systems. It is designed for use at lower temperatures than normal which will result in considerable savings in energy consumption. K-Soak 110 is a highly alkaline; soak cleaner, suitable for steel, copper and brass. K-Soak 110 is an extremely efficient soak cleaner designed to remove soils including pressing compounds, deep drawing oils and rust-preventing oils.

K-Soak 135

K-Soak 135 is a powdered, silicate, strongly alkaline cleaner. It is normally used in immersion processing equipment for heavy duty, general purpose cleaning of ferrous metals.

K-Soak 28

K-SOAK 28 is a highly efficient, economical multi-purpose, silicate, alkaline based degreaser for use on steel. K-SOAK 28 is a highly effective long lasting degreaser with good emulsification, soil dispersion and risibility properties

K-Soak 8080

K-SOAK 8080 is formulated to enable efficient removal of normally encountered shop soils such as pressing lubricants and polishing compositions prior to electroplating operations. K-SOAK 8080 is designed primarily for final stage anodic cleaning of copper, brass and zinc die-castings.

K-Soak D-230

Multi-Purpose, Non-Cyanide Soak Alkaline Cleaner

K-Soak D-300

K-SOAK D-300 is a highly wetted, mildly alkaline, non-silicate, very versatile soak cleaner for the removal of buffing compounds, soaps and oils from steel, brass, copper and aluminium. Has a great appeal where several metals are processed in one cleaning tank. Excellent when used as an ultrasonic cleaner for intricate articles such as jewellery.

K-Soak D-700

K-SOAK D-700 is a highly efficient and economical multi-purpose cleaner combinding derusting and descaling of ferrous metals that are soiled with oil, grease and paint. K-SOAK D-700 is a fume-free product with no hydrogen embrittlement properties.

K-Soak D-900

K-Soak D-900 is a highly efficient and economical multi-purpose low foaming cleaner combining de-rusting and descaling of ferrous metals that are soiled with oil, grease and paint in immersion or spray applications, and is readily soluble in warm water. K-Soak D-900 is a fume free product with no hydrogen embrittlement properties.

K-Soak LT Spray

K-SOAK SPRAY LT is an alkaline degreaser specifically formulated for spray systems that degrease ferrous and non-ferrous components. K-SOAK SPRAY LT is a powdered caustic blend containing very specific detergents, wetting agents, inhibitors and emulsifiers. K-SOAK SPRAY LT is an ideal cleaner where high rates of production are encountered – e.g. automatic plants. K-SOAK SPRAY LT is designed to be used at lower temperatures than conventional degreasers and will result in considerable savings in energy.

K-Soak M-100

K-SOAK M-100 is an all-purpose, soak process for use on steel, copper, brass and zinc K-SOAK M-100 will rapidly remove oils, greases, polishing compositions etc, without any attack on the base metal. K-SOAK M-100 is designed to be used on both vat and barrel installations prior to electroplating or phosphating operations. K-SOAK M-100 is an anhydrous alkaline system which is 100% active. It contains a complete synthetic detergent system and organic chelating agents. This enables highly effective emulsification and soil dispersion together with hard water stability and free rinsing characteristics.

K-Soak O-3

K-SOAK O-3 is a highly efficient, economical, multi-purpose, silicate alkaline based degreaser for use on steel. K-SOAK O-3 is a highly effective long lasting degreaser with good emulsification, soil dispersion and risibility properties.

Solvex -

SOLVEX is a liquid form solvent – emulsion degreaser. It is designed to be diluted with diesel fuel, paraffin, power paraffin or any suitable halogenated solvent before use. It can be applied by brushing, spraying, dipping or flow on techniques. After suitable dwell time the loosened contamination can be rinsed off with clean water. It will remove most types of oils, greases and related soils from various types of hard surfaces. SOLVEX is safe to use an all encountered metals. Its suitability for use on plastics and certain electric wiring must, however, first be established before general use.

Stannoglo A300 Tin Conc.

Stannoglo A300 is the tin additive for the Stannoglo HSM high speed matte/semi bright tin plating process. This additive maintains the stannous tin levelsin the product.

Stannoglo A70 Acid Conc.

Stannoglo A70 is a specially formulated additive for Stannoglo HSM high speed matte/semi bright tin plating system. This additive has been formulated to maintain the speed and efficacy of the plating process.

Stannoglo HSM

Stannoglo HSM is an additive for the Stanoglo HSM high speed matte/semi bright tin plating process. This product smoothes and brightens the final plating ensuring an even coating with good ductiity.

Oracle CZN 111

ORACLE CZN 111 BRIGHTENER is a liquid, single – additive zinc brightener for cyanide zinc plating, either rack or barrel. ORACLE CZN 111 BRIGHTENER produces brilliant deposits through a wide current density range.

It also features excellent throwing power at high cathode efficiencies, resulting in high quality deposits and lower operating costs. ORACLE CZN 111 BRIGHTENER exhibits these superior characteristics in low, medium and conventional cyanide zinc systems.

ORACLE CZN 111 BRIGHTENER shows excellent stability at elevated bath temperatures in those situations where cooling is minimal or not available. The bath is simple to operate and control. Additions of ORACLE CZN 111 BRIGHTENER may be made on the basis of appearance of the work or on Hull Cell tests. The zinc deposit produced from the ORACLE CZN 111 BRIGHTENER process is compatible with all Hexakoat or Trikoat conversion processes.

Oracle CZN Purifier

Oracle CZN Purifier removes organis contaminants from a cyanide zinc solution.

Oracle CZN-444

Oracle CZN - 444 is a concentrated, all-purpose, aldehyde-free, cyanide zinc brightener. It is suitable for use in both vat and barrel installations and in all ranges of cyanide zinc electroplating bath formulations.

Sodium Cyanide 50kg Steel Drum

RAW

Unifloc K 240

UNIFLOC K-240 is a ready-to-use liquid for the rapid precipitation of carbonates from cyanide plating solutions. It removes carbonates without increasing the cyanide or caustic content of the plating bath.

Excess carbonates in a cyanide-plating bath have a detrimental effect on the plating solution. Loss of plating efficiency, plating roughness, anode polarization, and high chemical and Brightener consumption are some of the problems encountered.

UNIFLOC K-240 can be used in batch treatments to remove large amounts of carbonates or on a continuing basis to keep carbonates at a low level.

Zinc Oxide B.P

RAW

K-Soak E-150

K-SOAK E-150 is a high efficiency cleaner which is extremely effective for treatment of oil contaminated surfaces. The formulation of K-SOAK E-150 promotes high speed penetration of oils and other soils, rapid cleaning action and effective emulsification. The buffered alkalinity of the cleaner ensures that all animal and vegetable fats are saponified, at the same time mineral oils and greases are completely removed by the excellent surfactant system.

K-Soak E-160

K-SOAK E-160 is a general-purpose alkaline electro cleaner specifically formulated for heavy duty cleaning of steel but it also may be used on copper.

K-SOAK E-160 is recommended where heavily soiled work is encountered and it should be used with K-SOAK D700 or K-SOAK 100 as the soak cleaner prior to K-SOAK E-160. K-SOAK E-160 is an ideal cleaner where high rates of production are encountered – e.g. automatic plants, rack and barrel. K-SOAK E-160 can be used either anodically or catholically.

KROMOLUX C REPLENISHER

Kromolux C REPLENISHER is an additive used to replenish the active ingredients in the Kromolux C baths.

KROMOLUX CONDUCTING SALTS

Kromolux C is multi-purpose cobalt alloyed gold plating, which yields deposits of 99 % minimum gold capable of providing bright deposits between 130– 230VPN

Kromecoat HC 20-T

KROMECOAT HC 20-T Chromium process is specially designed as a high speed; etch free replacement for ordinary hard chromium plating baths. The process deposits at rates similar to those from a mixed catalyst system, but does not exhibit the low current density etch problems normally experienced.

Kromecoat HC-20

KROMECOAT HC-20 Chromium process is specially designed as a high speed; etch free replacement for ordinary hard chromium plating baths. The process deposits at rates similar to those from a mixed catalyst system, but does not exhibit the low current density etch problems normally experienced.

Fumecontrol LF21-2

FUMECONTROL LF21-2 Mist Suppressant is a stable, highly effective, liquid surfactant for chromium plating baths. It provides an excellent balance between a controlled layer of foam and surface tension reduction to significantly reduce misting and to reduce drag out. FUMECONTROL LF21-2 is a non-PFOS and non-PFC based surfactant.

FUMECONTROL LF21-2 is suitable for use in both Decorative and Functional (Hard) chromium applications. FUMECONTROL LF21-2 lowers the surface tension to 25 - 35 mN/m, substantially cutting drag-out losses, as well as reducing the size of escaping bubbles.

Fumetrol 21LF/2- 20KG Atotech

FUMECONTROL LF21-2 Mist Suppressant is a stable, highly effective, liquid surfactant for chromium plating baths. It provides an excellent balance between a controlled layer of foam and surface tension reduction to significantly reduce misting and to reduce drag out. FUMECONTROL LF21-2 is a non-PFOS and non-PFC based surfactant. FUMECONTROL LF21-2 is suitable for use in both Decorative and Functional (Hard) chromium applications. FUMECONTROL LF21-2 lowers the surface tension to 25 - 35 mN/m, substantially cutting drag-out losses, as well as reducing the size of escaping bubbles.

Heef 25 25A

The HEEF 25 plating process offers a fluoride free catalysed hard chromium process. This process exhibits a high current efficiency and does require any special equipment and thus can be run efficiently in any conventional bath. There are many significant dvantages to using HEEF 25 in a catalysed chrome bath such as; excellent chromium coverage and deposition efficiency, deposition times can be decreased by >40%, more stable additives and bath performance than mixed catalyst electrolytes, bright, hard deposits easily achieved, good activation of stainless steels, good resistance to contamination.

Anthracite Nickel Salts

The ANTHRACITE NICKEL deposit has excellent throwing power, giving a thin even deposit. The corrosion protection and brightness or matt effect, are usually achieved by deposition of an intermediate layer from a bright nickel or pearl bright nickel electrolyte. The process is suitable for deposition of anthracite layers on iron, copper, brass, zinc, silver, tin, gold, bronze, German silver and nickel surfaces (also on electroless nickel layers). “Antique colours” are obtained by relieving the plated items.

Boric Acid HP

Boric acid is used as an additive in nickel plating. It is used as a pH buffer for the solution. This product is quality checked by Krome Metal Chemicals to ensure only the highest quality is supplied to the customer.

GH Stripper

GH STRIPPER strips copper, nickel and chromium from racks at high speed. GH STRIPPER does not produce sludge which causes problems during waste disposal. The stripped metal will be transformed to an oxide form and therefore reduces the amount of metal hydroxides. GH STRIPPER causes minimal maintenance costs with no pH correction necessary. Losses of electrolyte can be replenished according to make-up and activity.

Kelnic 250

KELNIC 250 is an advanced Electroless Nickel plating process designed to deposit a uniform, hard, very bright nickel-phosphorus alloy. Under ideal conditions the KELNIC 250 process is capable of deposition rates of up to 25μm per hour without sacrificing stability. KELNIC 250 is supplied as a three component liquid system, namely: 1. KELNIC 250 PART A : make up and replenishment additive. 2. KELNIC 250 PART B : make up additive. 3. KELNIC 250 PART C : replenishment additive.

Nickel Carbonate

RAW

Nickel Chloride 25%

RAW

Nickel Sulphate Selectra

RAW

Odyssey B-300

The ODYSSEY B300 process provides extremely fast rates of brightening and levelling with excellent low current density performance even on the most difficult to plate components. ODYSSEY B300 unique brightener system produces outstanding results where wide fluctuations in current density and current interruptions are experienced, without additive breakdown and high additive consumption.

Odyssey Brightener 2

Odyssey Brightener 2, bright nickel is a new technology bright nickel process which has been uniquely developed by the technical expertise of the acknowledged leader in the nickel electroplating industry Krome Metal Chemicals. The Odyssey Brightener 2, bright nickel process produces unsurpassed fast rates of brightening and leveling without sacrificing ductility or low current density performance. Odyssey Brightener 2, bright nickel process is ideal for producing high quality thin nickel deposits on unpolished steel and tubular steel.

Odyssey Carrier

Odyssey Carrier agent has strong ductilising and stress reducing ability Odyssey Carrier is added to maintain maximum brilliance and ductility of the deposit.

Odyssey Satin GS-50

The new generation ODYSSEY SATIN GS-50 produces an attractive, non-glaring finish due to the formation of the ODYSSEY SATIN GS-50 highly stable micro-emulsions in the conventional satin nickel electrolytes. This process provides a broad ‘operating window’, making it easy to operate. The ODYSSEY SATIN GS-50 requires no subsequent mechanical operations. It may be applied on steel, copper, plastics, zinc, cast iron and aluminium. The deposit is not sensitive to fingerprints and can easily be plated with chrome, gold, silver, etc. This process is particularly suitable for bathroom fittings, door fixtures, automobile components, spectacle frames, watchcases, and light fittings audio and video equipment.

Odyssey White Label

Odyssey White Label is used in bright nickel plating solutions to control dark low current density areas due to excessive zinc contamination. This additive is designed for use with Odyssey Carrier control agent. It will also remove the effects of copper contamination and reduce the effects of excess brightener. When used with Odyssey Carrier, Odyssey White Label provides tolerance to zinc contamination up to 150 ppm.

Kromeguard Green

KROMEGUARD GREEN is a solvent free Plastisol designed to protect electroplating jigs from metallizing when used in combination with Kromeguard Primer. The product is a pure Plastisol without any fillers allowing for longer life jig protections. It is also extremely suitable for plating on Plastics lines due to it resistance to metalize as easily.

Nickel Sulphamate

RAW

Potassium Cyanide 50KG

RAW

Silver Potassium Cyanide

RAW

Stannous Cl. Anhydrous

RAW

Trichloroethylene

RAW

Krome Mirror

Krome Mirror is a silver conversion coating product that can be used as either immersion or a wipe on product for copper substrates. The use of Krome Mirror is simple with excellent results. The resulting effect of Krome Mirror is an even silver coating layer deposited on copper with excellent brightness. This is a liquid product that is ready to use with no dilution needed.

Silverglo AGO

SHS 4000 is an effective alcohol based liquid hand sanitizer that effectively and efficiently sanitizes hands without causing extreme dryness. Most effective against bacteria, yeast and microorganisms. Silverglo AGO is particularly suitable for silver plating parts from the electronics industry. It is especially suited for the plating of microwave conductors. Silverglo AGO contains special additives which prevent tarnishing of the silver layer in case of longer transfer times (automatic plant) Silverglo AGO is suitable for both rack and barrel plating in open-ended and submerged electroplating barrels.

Blackening Salts

BLACKENING SALTS is a conversion coating product used specifically in treating steel and iron by immersion. The process converts the metal surface to a non-metallic, black, iron-oxide coating, which is both decorative and protective. The use of oils, waxes or clear lacquers over the black oxide coating provides an attractive, corrosion-resistant finish.

Blacksteel (Liq)

BLACKSTEEL will chemically black cast iron and steels containing 12 % chromium or less at room temperature (20 °C). Blacking performance may be adversely affected by temperatures lower than 16 °C. Preparation of the surface of the item to be blacked is carried out using one or more steps involving degreasing, pickling and conditioning using appropriate products with intermediate flowing water rinses.

Once the surface is chemically clean and, if necessary, conditioned, the item is immersed in the BLACKSTEEL solution for 1 minute. Components are normally jigged or barrelled with agitation if necessary to ensure all parts of the metal surface are in contact with the liquid. Following blacking, the item is rinsed in a flowing water bath and finally dipped in dewatering oil.

Ebonite MS

EBONITE MS is a process for blackening iron and steel by simple immersion. Uniform black coatings of ferroferric oxide (Fe(FeO2) are produced, which are an integral part of the basis metal. They will withstand severe deformation without flaking. Beautiful shiny, black coatings are obtained on buffered or polished surfaces, and flat, non-reflective coatings are obtained on etched or sandblasted steel.

EBONITE MS is a powdered product, which is dissolved in water to make-up the blackening solution. EBONITE MS will blacken a wide range of alloys, low and high carbon steels and low alloy steels. EBONITE MS will even blacken some cast and malleable irons, depending on their composition. EBONITE MS solution will not blacken stainless steel. EBONITE MS contains complexing agents that eliminate the effects of Copper and Iron contamination in the blackening solution.

In other words, red smut formation on the work caused by Copper and Iron contamination on the workpiece, or Copper and Iron contamination of the solution, is eliminated. EBONITE MS also contains a surfactant that reduces the surface tension, thereby lowering the drag-out and reducing tank spray. Also there is a greatly reduced amount of sludge formation in the operation of EBONITE MS solutions, affording a substantial saving in the amount of heat required to maintain the operating temperature. Black Oxide coating product by EBONITE MS has moderate corrosion resistance in general. The lower the carbon content of steel, the higher the corrosion resistance. EBONITE MS coatings will withstand from 2 – 6 hours in 20% salt spray, which is sufficient for most indoor use.

For outside use, additional protection should be provided by oiling, waxing or lacquering the work after blackening. The dimensional changes involved in blackening are extremely small, being less than 0.25 microns. The thickness of the black oxide coatings range from 1.5 – 2.5 microns.

K-Strip A (Powder)

K-STRIP A is a highly efficient and economical multipurpose stripper for phosphated and painted steel. K-STRIP A is a fume free product with no hydrogen embrittlement properties and can be used for immersion or spray applications.

K-Strip Aid (Nickel)

K-STRIP AID is a granular additive used in stripping copper, nickel, cadmium, zinc, silver and tin from ferrous based metals and brass and copper.

K-Strip M

K-STRIP M is a granular additive compound used for the electroless stripping of nickel from brass and copper substrates, with no attack of base metal.

Fluoboric Acid

RAW

Fluoboric Acid 45%

RAW

Tinflocc

Tinflocc is product specially forulated to precipitate out the unwanted Tin (IV) in tin plating processes.

Clear Lacquer

The clear lacquer is a high quality, durable and quick drying lacquer designed to be cost effective. Based on high quality synthetic, fast drying alkyd system.

De Wet - Oil 100

DEWET OIL is a blend of surfactants, corrosion inhibitors and oils in a solvent. It is designed to have excellent dewatering and penetrating properties. DEWET OIL leaves a thin, oily film on the material surface, which imparts good corrosion protection.

K-LAK CLEAR

K-LAK CLEAR is a unique blend of co-polymerized acrylics as a water-based lacquer, which is solvent free and non-flammable. The coating, once baked, creates a clear cross linked polymer which is light and heat stable and resists corrosive atmospheres and weathering

Korroshield 401 Plus

Post Dip Seal Solution for Chromated and Passivate Zinc and Zinc Alloy Layers

Krome Corrosion Prevent 25

Krome Corrosion Prevent 3025 is a clear synthetic, liquid that provides corrosion inhibition on steel and cast iron parts. Krome Corrosion Prevent 3025 does not contain nitrites, nitrates or chromates, therefore it will not cause contamination problems with hydraulic or brake fluids

K-Seal 500

K-SEAL 500 is an anti-corrosion passivation additive used on zinc electroplated components. K-SEAL 500 enables the market place to enhance corrosion resistance and still remain cosmetically appealing. K-SEAL 500 provides exceptional corrosion resistance on Zinc plated components. White corrosion (more than 200 hours) and red rust (500 hours) in a 5% neutral salt spray test. K-SEAL 500 can be used in both rack and barrel applications on zinc, cadmium and aluminium.

K-Seal 550

K-SEAL 550 is an anti-corrosion passivation additive used on zinc electroplated components. K-SEAL 550 enables the market place to enhance corrosion resistance and still remain cosmetically appealing. K-SEAL 550 provides exceptional corrosion resistance on Zinc plated components. White corrosion (more than 200 hours) and red rust (500 hours) in a 5% neutral salt spray test. K-SEAL 550 can be used in both rack and barrel applications on zinc, cadmium and aluminium.

Trikoat BL-10

Trikoat BL-10 is a new generation, high corrosion resistant passivate. Unlike conventional blue passivates Trikoat BL-10 is capable of providing protection in excess of 24 hours Neutral Salt Spray before the formation of white corrosion products. Due to the latest technologies Trikoat BL-10 will give a consistent passivation film of even color. Excellent, clear, blue finishes can be uniformly obtained on zinc deposits produced from all types of zinc electrolytes. The product is free from hexavalent Chromium (CrVl) compounds and hence the conversion coatings produced are free from hazardous chromate compounds. TRIKOAT BL-10 process can be used for rack or barrel plating in manual or automatic plants to produce a bright, blue, uniform color.

Trikoat Black Pass

Trikoat Black Pass is a liquid passivation for black Cr6+ free, trivalent chromium passivation on zinc and zinc alloys. The passivated film gives a deep, semi-gloss black colour when used in conjunction with a final topcoat. A final topcoat must be applied to achieve sufficient corrosion protection and colour parameters.

Trikoat Black Shine

Trikoat Black Shine is a liquid passivation for black Cr6+ free, trivalent chromium passivation on zinc and zinc alloys. The passivated film gives a deep, semi-gloss black colour when used in conjunction with a final topcoat. A final topcoat must be applied to achieve sufficient corrosion protection and colour parameters. This product is hexavalent chrome free, as well as silver nitrate free making it a less toxic and less reactive to any compounds it is exposed to.

Trikoat BL-Y Additive

Trikoat BL-Y is a liquid passivation for yellow Cr6+ free, trivalent chromium passivation on zinc and alloys. It provides a thick iridescent to yellow passivation film. The passivated film almost resembles to hexavalent passivation. Films achieve excellent corrosion resistance, which corresponds to the performance of a yellow chromate based upon hexavalent chromium. A final topcoat can be applied to further enhance the corrosion protection.

Krome Debur 02

Krome Debur-02 is a solid burnishing compound used on ferrous and non-ferrous parts in conjunction with steel media. Burnishing of ferrous parts can be found in special applications.

Krome Debur L-55

ORACLE ZNA

ORACLE ZNA is an alkaline non-cyanide zinc nickel electroplating process for use in rack and barrel installations. The bath produces a uniform zinc nickel alloy deposit of between 12 and 16% over a wide range of current densities. Zinc nickel alloy deposits offer superior corrosion resistance often required by automobile specifications.

Black Nite S

BLACKNITE S is a single stage chromate treatment, which produces a lustrous black film on zinc plate. The coating produced by this process is highly decorative and provides additional corrosion protection to the zinc plate. The BLACKNITE S process is an easy to run effective process which is a combination of two additives, BLACKNITE C and BACKNITE S. BLACKNITE S is the additive is specially formulated that when inconjunction with BLACKNITE C produces as illustrious black passivation on zinc plated parts.

BLACK PASS Part A

BLACK PASS is an easy to use two part system which provides a deep black passivation for zinc plated parts. BLACK PASS Part A is the hexavalent chrome part of the system which passivates and creates an excellent corrosion protection for the zinc plating.

Hexakoat 274

Hexacoat 274 is a concentrated additive, which is diluted with water to give an iridescent chromate film on electro-plated zinc, cadmium or un-plated zinc based die castings. Hexacoat 274 is a single-stage process that produces conversion coatings with exceptional corrosion resistance. As it is not sensitive to long transfer times, Hexacoat 274 can be used in virtually all types of plating equipment.

Hexakoat DB-88

HEXAKOAT DB-88 is a single dip – chromate that produces a superior, chrome blue-bright surface on zinc plate. Makeup and control of the bath are easy; results are consistent. The solution maintains its stability over a long period, against the adverse effects of alkaline drag-in, and the reaction of the highly active zinc-plated parts with the acidic chromate. Long bath life assures economical operation. HEXAKOAT DB-88 is adaptable to both rack and barrel installations, either manual or automatic. It works on cyanide, alkaline non – cyanide and chloride zinc deposits to provide the maximum corrosion protection available from a one – dip treatment. HEXAKOAT DB-88 is supplied as a self-contained, single liquid additive that requires no separate acid solutions.

Hexakoat DY-747

HEXAKOAT DY 747 is a concentrated additive, which is diluted with water to give an iridescent chromate film on electro – plated zinc, cadmium or un-plated zinc-based die-castings. HEXAKOAT DY 747 has been specifically developed for automotive application where salt spray in excess of 120 hours is required. HEXAKOAT DY 747 is a single – stage process that produces conversion coatings with exceptional corrosion resistance.

As it is not sensitive to long transfer times, HEXAKOAT DY 747 can be used in virtually all types of plating equipment. HEXAKOAT DY 74 7is ideally suited for use with cyanide, alkaline or acid zinc plating processes, where highly active zinc deposits are frequently encountered. Freshly plated articles, after adequate rinsing, can be processed directly through the. Plated work that has been stored, or has become soiled, should be soaked cleaned for about 30 seconds in a mildly alkaline soak cleaner before further processing.

In either case, a dilute Nitric Acid dip, 0.25 – 0.5% by volume concentrated Nitric Acid, can be used if desired between the plating and passivating stages, to remove surface discolorations, and to extend the life of the HEXAKOAT DY 747 solution. Zinc die-castings must be thoroughly cleaned and activated before treatment in HEXAKOAT DY 747. After processing the parts should be thoroughly rinsed and dried.

Hexakoat Olive

Hexakoat Olive is an olive drab passivation treatment for all types of rack electroplated zinc substrates. The process is easy to maintain and has a wide operating window. The treated articles have an attractive, very even, dark green appearance and afford excellent corrosion resistance.

Hexakoat PB

HEXAKOAT PB-88 is a single dip – chromate that produces a superior, chrome blue-bright surface on zinc plate. Makeup and control of the bath are easy; results are consistent. The solution maintains its stability over a long period, against the adverse effects of alkaline drag-in, and the reaction of the highly active zinc-plated parts with the acidic chromate. Long bath life assures economical operation. HEXAKOAT PB-88 is adaptable to both, rack and barrel installations, either manual or automatic. It works on cyanide, alkaline non – cyanide and chloride zinc deposits to provide the maximum corrosion protection available from a one – dip treatment. HEXAKOAT PB-88 is supplied as a self-contained, single powder additive that requires no separate acid solutions.

Trikoat HB/ECO-H/BTriv

TRIKOAT HB is a trivalent chrome (III) containing passivation for zinc and zinc alloy layers, which is completely free of hexavalent chrome (VI) and fluoride. With TRIKOAT HB, excellent corrosion resistance can be achieved, which are higher than the normal values for Cr (VI) containing yellow chromate Passivation. Even after heat treatment (1 hour at 120ºC) the corrosion resistance won’t be diminished. Corrosion resistance in a barrel with 15µm of Zinc can achieve 120 Hours Salt Spray Resistance to White Rust and 240 Hours Salts Spray Resistance to White Rust in a Rack with 15µm of Zinc. Top coats can achieve up 480 – 600Hrs to White Rust. TRIKOAT HB produces blue to green iridescent chromate layers on all zinc deposits. TRIKOAT HB has an excellent lifespan. TRIKOAT HB can be used for both rack and barrel plating. TRIKOAT HB will not re-oxidize back to hexavalent chromium in operations.

Alukate

The ALUKATE process is a treatment for aluminium and its alloys which enables many different electrodeposits to be applied directly without intermediate brass or copper plating. It involves the use of special alkaline cleaner K-Soak M-100 followed by a unique solution ALUKATE. The process is simple to operate and has an additional advantage over earlier processes in that the plated articles do not need to be staved to safeguard adhesion. The ALUKATE treatment produces a film on aluminium or aluminium alloy, which may be plated directly with nickel, cyanide or pyrophosphate copper, brass, silver, chromium (sulphate catalysed type e.g. Zonax) tin, zinc or cadmium. It is a single non-fuming liquid reagent, which is supplied ready for use. The solution has a long life and yields consistent immersion coating when used as an undercoat for electroless nickel and other electroplating processes.

Alukate Replenisher A

Alukate Replenisher A is an additive to an Alukate bath. This additive is used to maintain the zinc levels in solution.

Copper Sulphate High Purity

RAW

Cupri AC 510 Part A

Cupri AC-510 RTU

Blackening Salts

Blacksteel (Liq)

Ebonite MS

our products and solutions

Galvanising

Hot dip galvanising is a process that involves immersing steel or iron in a bath of molten zinc to create a protective coating. The metal is submerged in the bath, typically heated to around 860°F (460°C), allowing the zinc to react with the iron or steel and form a series of zinc-iron alloy layers that tightly bond to the surface. This zinc layer acts as a barrier, providing exceptional protection against corrosion and wear, making it particularly suitable for outdoor applications. Hot dip galvanising finds wide-ranging applications in industries such as automotive, construction, marine, and agriculture.T

his process can be applied to various metals, including steel, iron, aluminum, brass, and copper. It is commonly used to protect structural steel components like beams, columns, and frames, as well as to coat items such as handrails, guardrails, and fasteners like nuts and bolts.

Hot dip galvanising offers a cost-effective solution for safeguarding metal components from corrosion and wear. It surpasses other coating methods, such as painting, in terms of durability and resistance to weather and ultraviolet radiation. Moreover, hot dip galvanising is an environmentally friendly option as it does not rely on the use of hazardous chemicals.

In summary, hot dip galvanising is a highly effective and economical technique for preserving metal components from corrosion and wear. Its protective qualities, durability, and eco-friendliness make it a preferred choice across various industries.

Krome Iron Fix

Kromeclean PA

KROMECLEAN PA is a specially formulated acidulated degreaser with light descaling properties. This system is used for cleaning heavily soiled items.

K-Soak HDG300

K-SOAK HDG 300 is a highly efficient, economical, alkaline based degreaser for use on iron and steel. K-SOAK HDG 300 is a highly effective long lasting degreaser with good emulsification, soil suspension and risibility properties. It also contains a Demitting agent.

Flux HD

K-Flux HD is a specialised molecular powdered flux for the galvanising industry. K-Flux HD allows for uniform fluxing of mild steel following degreasing and pickling in hot dip galvanising K-Flux HD is a molecular mix of crystals which are completely stable when exposed to the atmosphere allowing better dissolution and storage as applied to the deliquescent nature of zinc chloride which solidifies under these conditions. K-Flux HD eliminates oxidation of the metal after pre-treatment and prior to galvanizing.

K-Flux De-Dross

K-Flux De-Dross is a specialised molecular powdered additive for the hot dip galvanising industry to aid in reduction of zinc losses during de-drossing. K-Flux De-Dross re-solubilises the zinc trapped in top dross, returning it to the kettle, resulting in less loss of zinc and easier removal of iron within the kettle.

K-Flux DS Double Salts

K-Flux DS is a specialised molecular powdered flux for the galvanising industry. K-Flux DS allows for uniform fluxing of mild steel following degreasing and pickling K-Flux DS is a molecular mix of crystals which are completely stable when exposed to the atmosphere allowing better dissolution and storage as applied to the deliquescent nature of zinc chloride which solidifies under these conditions. K-Flux DS eliminates oxidation of the metal after pre-treatment and prior to galvanizing.

K-Flux W-3

K-Flux W-3 is a specialised molecular powdered flux for the wire-drawing industry. K-Flux W-3 allows for uniform fluxing of mild steel following degreasing and pickling K-Flux W-3 is a molecular mix of crystals which are completely stable when exposed to the atmosphere allowing better dissolution and storage as applied to the deliquescent nature of zinc chloride which solidifies under these conditions. K-Flux W-3 eliminates oxidation of the metal after pre-treatment and prior to galvanizing.

Krome Ferro-Kill

Krome Ferro-Kill is a specialised oxidising agent for the conversion of Fe(II) to Fe(III) so that it can be precipitated from Zinc flux solutions. Krome Ferro-Kill quickly and efficiently removes iron from flux solutions, without significantly affecting the zinc or ammonia concentration. The product is used off-line in a settling tank to constantly reduce the iron levels in the flux. Krome Ferro-Kill can also be used in a conventional way for the removal of iron from flux on a batch or tank process. It acts much faster and more effectively than conventional peroxide treatment methods.

Galvawipe R

A premixed charcoal based wiping medium containing inert additives and fire retardants for hot dip galvanizing to produce smooth uniform coatings. By use of these unique combinations of ingredients and special compound procedure, this product will last much longer than other materials, while resulting in less smoking during use.

Galvawipe W

K-Flux Wire CFR

K-Flux Wire CFR is a specialised molecular powdered flux for the wire-drawing industry. K-Flux Wire CFR allows for uniform fluxing of mild steel following degreasing and pickling K-Flux Wire CFR is a molecular mix of crystals which are completely stable when exposed to the atmosphere allowing better dissolution and storage. K-Flux Wire CFR eliminates oxidation of the metal after pre-treatment and prior to galvanizing.

Nickel Tablet

KROME NICKEL TABLETS are specially formulated as an effective way of introducing nickel metal into a hot dip galvanizing, zinc kettle.

Kromemist 75

KROMEMIST 75 is liquid inhibitor formulated for use in conventional Hydrochloric Acid pickling or cleaning operations on mild or unreactive steels. KROMEMIST 75 will also improve risibility and cleaning. This will reduce the carryover of chlorides into subsequent baths. KROMEMIST 75 is an effective inhibitor for pickling prior to electroplating. Low foam reducing drag-out.

Acitrol 82

ACITROL 82 is a semi-foaming liquid inhibitor containing detergents and is formulated for use in hydrochloric acid pickling. The detergency of ACITROL 82 improves the rinsing of pickled work. It may be used on any type of steel and can be used with the concentrated acid. ACITROL 82 is an effective inhibitor for Hydrochloric and hydrochloric/hydrofluoric acid mixtures in pickling and industrial cleaning operations. ACITROL 82 significantly reduces the hydrogen embrittlement of the steel that can be caused by pickling.

K-Flux Buffer

Specially formulated buffer solution to maintain the pH of a Flux. This product will increase the productivity of the flux as well as ensuring an excellent flux coating on the part. K-Flux Buffer also reduces and oxidation of the part keeps and the iron level in the flux at the correct levels.

Galvastop K

Galvastop K is a rapidly air drying blend of silicate free synthetic resins specifically formulated for the Hot Dip Galvanizing Industry as a stable and convenient stop off material. It can go through the pre-treatment cycle and withstand 500˚C in the Hot Dip cycle.

Chemcoater 652

CHEMCOATER 652 is a chromate based liquid product designed to provide a sludgeless solution for treating after hot dip galvanizing and any zinc based alloys. A light chromate coating is deposited which is pale yellow in colour.

our products and solutions

lubricants

Lubricants are essential additives that facilitate smooth and efficient operations, designed to reduce friction and wear between metal surfaces during various machining, cutting, and forming operations. Their primary function is to ensure that cutting tools, drills, and other machinery components operate at optimal temperatures. This heat dissipation capability helps prevent the detrimental effects of overheating, such as tool deformation and premature wear.

Lubricants also offer exceptional chip evacuation properties. By efficiently carrying away metal shavings and chips from the cutting zone, they prevent clogging and ensure uninterrupted machining, resulting in improved productivity and dimensional accuracy.

Lubricants contribute to improved surface quality and precision by reducing built-up edge formation, minimizing tool vibrations, and enhancing chip formation. These effects lead to enhanced surface finishes, tighter tolerances, and superior workpiece integrity.

Krome Lube LH2000-200KG

Krome Lube LH2000 is a water-soluble, liquid lubricant, with excellent lubricating properties, leaving little oily residue on the drawn wire.

Krome Lube DD300

Krome Lube DD 300 is a water-soluble lubricant paste, suitable for heavy duty or deep drawing of steel and other metals.

PL 1004 Pressing Lube

PL 1004 Pressing Lube is a Water Based Emulsion used as an alternative to a Chlorinated Oils in the drawing, and forming industry. PL 1004 Pressing Lube is safe to use on all types of metals. The use of PL 1004 Pressing Lube means the metals will not decompose during high humidity or extreme heat and will not discolour. This lubricant, which is soluble in water, is particularly well suited to wire drawing of ferrous materials. The main objective is to remove the heat generated from the deformation of the material as quick as possible (water being the best vehicle), and to limit friction. By employing PL 1004 Pressing Lube an unctuous anti-wear or extreme pressure film in the deformation zone is formed.

our products and solutions

powder coating

Powder Coating involves the application of a dry powder onto a metal surface, which is then cured under heat to form a tough, protective layer. Powder coating offers numerous advantages over traditional liquid paint, including enhanced durability, improved environmental friendliness, and superior aesthetics.

The powder used in the process consists of finely ground particles of pigment, resin, and additives. It is typically electrostatically charged, allowing it to adhere to the grounded metal surface. The charged powder particles are attracted to the metal, creating a uniform coating that adheres tightly to the surface.

Powder Coating is highly resistant to impact, chemicals, abrasion, and UV radiation. This durability results in a longer lifespan for the coated object. Additionally, powder coating is environmentally friendly as it produces minimal volatile organic compounds (VOCs) and does not require solvents. This makes it a safe and sustainable option for both manufacturers and consumers.

Furthermore, powder coating allows for a wide range of colours, finishes, and effects. It can be customized to achieve various textures, gloss levels, and even special effects like metallic or textured finishes. This versatility makes powder coating a popular choice for both functional and decorative applications across industries such as automotive, architecture, furniture, appliances, and more.

Alukoat 142

The Alukoat 142 is a powdered chemical, chromate conversion coating for aluminium and its alloys. The coating ranges in the colour from a light iridescent gold to tan. It provides excellent corrosion protection and promotes superior paint adhesion and flexibility. The coating produced complies with the military Specification MIL-C-5541C.

Alukoat 20A

ALUKOAT 20A-40B is a chemical compound to produce in a low Temperature process – an amorphous protective and paint bonding coat on aluminium and its alloys. The colour Of this coat ranges from light blue-green through darker Green, is architecturally harmonious and reduces glare. Alukoat 20A is the chromate additive for this chromate conversion coating.

Alukoat 240

ALUKOAT 240 is a chemical process that produces a protective chromate conversion film on aluminium alloys. Application is dip, brush, swab or spray, producing coatings ranging from clear to dark yellow; the darker coatings providing the greatest corrosion protection. The coating can be used as a final finish or can be dyed various colours. It can also serve as a base for paints and laquers, or as a base for rubber bonding.

Chemcoater 614 M

CHEMCOATER 614 M is designed to provide a sludgeless solution for treating aluminium and its alloys by sheet, stripline or immersion application. An amorphous oxide coating is formed and the colour is iridescent yellow to light golden brown, depending on the alloy and solution control.

Chemclean 546

CHEMCLEAN 546 is a blend of alkalis, sequestrants and surfactants, designed for the removal of heavy oils, drawing compounds and lubricants, especially prior to phosphating and vitreous enameling. It is used by immersion.

Chemcoater 720 F

A liquid blend of phosphate compounds, accelerators and surfactants. CHEMCOATER 720 F is mildly acidic in concentrated form, however when diluted with water CHEMCOATER 720F acts as a neutral cleaner.

Cleaner 420

CLEANER 420 is a liquid blend of alkali builders, solvents, surfactants and sequestrants formulated to remove oils and grease from hard surfaces. CLEANER 420 is a clear pale off white liquid.

Krosol MC 80

An effective, efficient solvent degreaser used to remove a wide range of greases, oils, wax compounds and other contaminants found in the general engineering and metal finishing industry. If you are looking for high performance and efficiency, KROSOL MC80 could be the product to address your economic and environmental demands.

K-Soak 2730

K-Soak Enviro 121

K-SOAK ENVIRO 121 is a highly specialized granular alkaline cleaner that thoroughly removes oily soils and carbonaceous deposits from ferrous metals at temperatures as low as 20°C.This specialized cleaner allows the benefit of cleaning as effectively as a standard hot soak cleaner at low temperature. Due to the blend of chemistry this new age detergent is totally bio-degradable and emulsifies most oil types with ease. Tests have proven that at low temperature this product outperforms all competitive cleaners in the market and can also be heated if a shorter cleaning time is required. As the product runs at low temperature it is generally covered in costs from the electricity reduction.

K-Soak LT-200

K-SOAK LT-200 is a highly specialized granular alkaline cleaner that thoroughly removes oily soils and carbonaceous deposits from ferrous metals and galvanized metals at temperatures as low as 20°C. This specialised cleaner allows the benefit of cleaning as effectively as a standard hot soak cleaner at low temperature. Tests have proven that at low temperature this product out-performs all competitive cleaners in the market and can also be heated if a shorter cleaning time is required. As the product runs at low temperature it is generally covered in costs from the electricity reduction.

K-Soak S-10

K-SOAK S-10 is a versatile, multi-metal, high detergency and penetrating powered spray cleaner powder. It is easily dissolved in water and is free rinsing with low foaming properties. This product effectively removes grease, cutting oils, protective oils and similar soils from common metals such as steel, aluminium, copper alloys, zinc and magnesium alloys. This product is also biodegradable for ease of disposal.

K-Soak SP-125L

K-SOAK SP-125L is a non-caustic spray wash cleaner that is safe to use on all metals. Because it is caustic-free and free rinsing, it’s especially recommended for cleaning prior to iron phosphatizing where caustic carry-over could affect the phosphate solution. Additionally, the low foaming characteristic of K-SOAK SP-125L increases cleaning efficiency, aids spray washer performance and decreases equipment maintenance costs. K-SOAK SP-125L is biodegradable which simplifies waste disposal. K-SOAK SP-125L is a free-flowing liquid readily soluble in hard or soft water.

LT 100 AL

LT 100 AL is a medium to heavy duty alkaline cleaner designed for cleaning iron, steel, aluminium and zinc, and is particularly suitable if the cleaner work is to be subsequently phosphated – it is used by immersion.

Phoskro SPL 225

PHOSKRO SPL 225 is a low-foam, neutral liquid cleaner concentrate used with PHOSKRO iron and zinc phosphates processes. It is particularly well suited for lower temperature operations. In addition to removing a broad variety of soils, PHOSKRO SPL 225 improves the quality of PHOSKRO phosphate coatings.

Aluetch 300

ALUETCH A 300 is an acidic formulation for use in the desmutting, etching and degreasing of aluminium and its alloys prior to the pre-treatment process of painting. ALUETCH A 300 produces a slight etching of the aluminium surface, which remains homogenous over the entire surface and throughout the dipping time. Aluetch A 300 meets the Qualicoat requirements of Section 3.2 for coastal exposure. ALUETCH A 300 has been developed as a heavy metal free process and contains no Boron or other components that require excessive effluent treatment prior to disposal.

Aluetch APL

Aluetch APL is an acidic formulation for use in desmutting and etching aluminiu. This formulation is a dual system that cleans the substrate as well as etching the aluminium. Aluetch APL produces a homogenous etch on aluminium as well as removing any dirt or grease from the part. it is an easy to use product with excellent results. The process has been specially formulated to be free from heavy metals as well as being free from any boron or compounds that would result in excessive effluent treatment prior to disposal.

Alukleen 225

ALUKLEEN 225 is a heavy duty cleaner for removing corrosion deposits from weathered aluminium, also on trucks and trailers, where road film is also removed. ALUKLEEN 225 was especially formulated to be used by immersion, spray or hand wipe to etch aluminium components prior to further processing.

K-Flux W-3

Krome Ferro-Kill

Inhibitor 4L

INHIBITOR 4L is a product especially formulated for re-circulating cooling water systems which exhibits corrosive tendencies. Inhibitor 4L consists of chromates and other corrosion inhibitors together with suspending and sequestering agents.

Chemcoater 751

CHEMCOATER 751 is an iron phosphate conversion coating agent formulated for the simultaneous cleaning and conditioning of mixed production of steel, aluminium and galvanized surfaces, by spray, immersion or steam gun application. The treatment produces a uniform phosphate coating which inhibits corrosion of the metal surface and is an ideal base for pain and powder coatings.

Chemcoater 755

CHEMCOATER 755 is an iron phosphate conversion coating agent formulated for the simultaneous cleaning and conditioning of mixed production of steel, aluminium and galvanized surfaces, by spray, immersion or steam gun application. The treatment produces a uniform phosphate coating which inhibits corrosion of the metal surface and is an ideal base for paint and powder coatings.

Chemcoater Activator

Chemcoater activator is a product used for maintaining the phosphating speed and the acid ratio in Chemcoater phosphate baths.

Phoscote

PHOSCOTE is an effective general purpose acid based descaler for rust and stain removal caused by oxidation. It is effectively used in marine, vehicle and general industrial applications.

Phoskro 210-LS

PHOSKRO 210-LS is a liquid iron phosphate developed for use on steel, iron, zinc and aluminium. It produces uniform coatings on each of these metals with a minimum amount of break-in. It is recommended for use in 5-Stage Systems or in two and three-stage systems. PHOSKRO 210-LS exceeds the coating weight requirements and, when used with Phoskro Sealer, meets or exceeds salt spray corrosion resistance requirements.

Phoskro 901

Phoskro 901 is a liquid iron phosphate producing uniform coatings. Phoskro 901 exceeds the coating weight requirements and, when used with Phoskro Sealer 800 Passivation range of additives, meets or exceeds the salt spray corrosion resistance requirements of Federal Specification TT-C490B, type II. The coating not only inhibits corrosion but also increases adhesion and durability of painted surfaces.

PHOSKRO HW 225

PHOSKRO HW 225 is a newly developed specialised acidulated degreaser and phosphate product used for large items that cannot be processed in an immersion or spray pre-treatment plant. The product is formulated to be used with high pressure sprayers and allows excellent detergency and excellent surface scale bonding and conversion to allow further bondable paints on surface.

Phoskro HW-24

PHOSKRO HW 24 is an acidulated degreaser and phosphate product useful for touching up and repairing large articles that cannot be effectively immersed in pre-treatment lines. PHOSKRO HW 24 leaves a light, short-term coating requiring immediate painting.

Phoskro Magnaphos 44

PHOSKRO MAGNAPHOS 44 produces a heavy, thick, uniform manganese phosphate coating on iron and steel surfaces. Treatment is by immersion at high temperatures. PHOSKRO MAGNAPHOS 44 coatings readily absorb and retain substantial amounts of oils or other lubricants. This important anti-friction feature results in excellent wear – resistant coatings for such applications as gears piston rings, camshafts and bearings. Coating weights range from 15000 to 3000 milligrams per square foot (162 – 324 mg/dm²). The PHOSKRO MAGNAPHOS 44 bath exhibits long life, seldom requiring discarding if proper controls are maintained. Sludge build-up in the PHOSKRO MAGNAPHOS 44 bath is slower and sludge removal simpler compared to competitive products.

Phoskro A-100

PHOSKRO A-100 is an advanced, liquid Multi–Metal Phosphatiser for treating steel and aluminium. It contains iron for durability, manganese for hardness, zinc for galvanic protection, and molybdenum for passivation. Being a liquid, PHOSKRO A-100 can be used in automated feeding systems. PHOSKRO A-100 operates effectively at low temperatures. Hence, it can be used with a low temperature cleaner in a single stage, if soil conditions permit.

Krome Nano-Protect

Krome Nano-Protect is a phosphate-free pre-treatment, based on nano technology, especially formulated for use in the treatment of steel, zinc and aluminium surfaces. The pre-treatment is free of volatile organic components and increases the corrosion resistance of painted metal surfaces. The corrosion resistance performance of Krome Nano-Protect will generally be equal to or better than that of an iron phosphate with a non-chrome post rinse. The pre-treatment may be applied by spray or immersion applications under ambient conditions and is followed by a deionized water rinse.

Passivate CR

PASSIVATE CR is a concentrated liquid containing metal compounds. It is used either by spray or immersion over zinc or iron phosphate coatings in the final stage prior to painting, oiling or waxing.

Phoskro Sealer 300

PHOSKRO SEALER 300 compound is an acidulated blended trivalent chromium liquid addition agent used in either an immersion or spray final rinse to improve paint adhesion on aluminium and phosphatized coatings to minimize under film corrosion and blistering. This acidic final rinse inactivates hard water salts normally present in water and leaves the components, which has been processed, with the Alukoat or Phoskro range in the best condition prior to painting.

PhosKro Sealer 800

PHOSKRO SEALER 800 is a highly concentrated chrome free passivation additive used as a final sealing rinse prior to powder coating. PHOSKRO SEALER 800 can be used in either a spray system or immersion to improve paint adhesion and to minimize under-film corrosion. PHOSKRO SEALER 800 can also be used as a passivate for the hot dipped galavanizing process to improve corrosion resistance of the applied film.

K-Acid 161

K-ACID 161 is a liquid chemical used for brightening or pickle polishing copper and its alloys. It is used to improve the lustre of cuprous surfaces and/or prepare them for plating or the application of organic coatings. K-ACID 161 prepares cuprous surfaces for mechanical buffing by removing oxide films and will minimize or may eliminate polishing operations.

Krome Steel Passivate

Krome Steel Passivate is designed to passivate steel components to prevent rust and flash rusting while products are in storage.

Passivator S

PASSIVATOR S has been designed for the use through the cold – water GERNI spray gun for passivation after wet sandblasting. Can also be used by immersion for temporary passivation for in-line processing. PASSIVATOR S is used to passivate reconditioned steel drums.

Phoskro Descale 90

Fast and effective rust removal by simple chemical treatment, salvaging and reclaiming iron and steel parts with PHOSKRO DESCALE 90 PHOSKRO DESCALE 90 is a chemical process for salvaging of rusted articles, bolts, nuts, tools etc. for use in reconditioning rusted articles so that they may be suitably prepared to receive a protective coat of paint or a rust-preventative. To solve the problem of removing rust and oil deposits from iron and Steel in a single operation. PHOSKRO DESCALE 90 has been developed. In one combined operation, it reconditions the metal, passivates the surface and prepares it for durable rust-proofing or painting. It eliminates corrosive and poisonous fumes, over-pickling and wire brushing.

Phoskro Descale NF-P

PHOSKRO DESCALE NF-P is a specially formulated acidulated de-rusting and de-scalant. This system is used for pre-treatment lines that do both aluminium and steel.

Phoskro Descale P

PHOSKRO DESCALE P is a specially formulated acidulated derusting and descalant with degreasing properties. This system is used for pre-treatment lines that do both aluminium and steel.

Acitrol 88

ACITROL 88 is a semi-foaming liquid inhibitor containing detergents and is formulated for use in sulphuric acid pickling. The detergency of ACITROL 88 improves the rinsing of pickled work. It may be used on any type of steel and can be used with the concentrated acid. ACITROL 88 is an effective inhibitor for sulphuric, hydrofluoric, phosphoric, acetic acids as well as Sulphamic, citric, oxalic and sodium sulphate solutions in pickling and industrial cleaning operations.

Acitrol 98

ACITROL 98 is a semi-foaming liquid inhibitor containing detergents and is formulated for use in sulphuric acid pickling. The detergency of ACITROL 88 improves the rinsing of pickled work. It may be used on any type of steel and can be used with the concentrated acid. ACITROL 98 is an effective inhibitor for sulphuric, hydrofluoric, phosphoric, acetic acids as well as Sulphamic, citric, oxalic and sodium sulphate solutions in pickling and industrial cleaning operations.

Derust 5

DERUST 5 is a Phosphoric acid based single step Degreaser and Deruster for all metals. It can be used by immersion or hand wash. A clear water white liquid containing phosphoric acid, detergents and inhibitors. This product leaves a light weight phosphate coating on the part to increase the corrosion protection of the substrate.

Descale S

DESCALE S is an inhibited sulphuric acid based product, which when diluted in water, removes heat treatment scale and rust from steel. Articles should be degreased in an alkaline cleaner before being immersed in the solution.

Phoskro PA 10S

Phoskro PA 10S is a water based detergent blend. Phoskro PA 10S is used as a wetting agent with most acids to aid degreasing. It improves the cleaning and de-rusting action of most pickling baths. Phoskro PA 10S can also be used with alkali cleaners to enhance foaming and cleaning action. Phoskro PA 10S also assists in fume control on pickling baths.

Phoskro Descale P

PHOSKRO DESCALE P is a specially formulated acidulated derusting and descalant with degreasing properties. This system is used for pre-treatment lines that do both aluminium and steel.

Methylated Spirits

RAW

Multisolve MS

An effective, efficient solvent degreaser used to remove a wide range of greases, oils, wax compounds and other contaminants found in the general engineering and metal finishing industry. If you are looking for high performance and efficiency, MULTISOLVE MS could be the product to address your economic and environmental demands.

E-Coat Stripper

BLACKENING PROCESS FOR STAINLESS AND HIGH ALLOY STEELS

K-Strip 1000

K-STRIP 1000 is a carbon paint stripper that operates at elevated temperatures. It has no carcinogenic products and is operator friendly. It successfully removes most stubborn paints, carbon and organic coating.

K-Strip 5000

K-STRIP 5000 is a liquid of low viscosity consisting of a blend of special solvents, penetrants and emulsifiers. K-STRIP 5000 has been developed for the removal of a wide variety of heavy and difficult contamination and carbon from aircraft and diesel engines and complies with the requirements of specification DTD 5538. It is also useful for the removal of most paints.

K-Strip 5000K-Strip SHG Gel/Paste

K-STRIP SHG GEL/PASTE is an off-white gel or paste consisting of a blend of special solvents, penetrants and emulsifiers. K-STRIP SHG GEL/PASTE has been developed for the removal of a wide variety of heavy and difficult contamination and carbon. It is also useful for the removal of most paints.

K-Strip SHG Sealer

K-Strip SHG Sealer is an additie to a stripping solution which forms a layer above the solution. This reduces the loss of product due to evaporation. This solution does not effect the efficacy of the stripping solution as well as reducing the costs of the stripper by reducing evaporation loss.

Powderstrip 200

POWDERSTRIP 200 is an alkaline heavy duty paint stripper supplied as an off-white powder. It contains caustic soda so should be handled with protective clothing and a face mask. It is designed for paint stripping of epoxy powder coatings and other organic paints from steel components.

Powderstrip Add 200

POWDERSTRIP 200 is an alkaline heavy duty paint stripper supplied as an off-white powder. It is designed for paint stripping of epoxy powder coatings and other organic paints from steel components.

Stripit T

A chlorinated solvent containing organic acid activators, thickeners and emulsifiers. STRIPIT T removes epoxy, vinyl, acrylic and phenolic paint coatings.

Alukoat TCP

The Alukoat TCP is a Hexavalent-free, liquid concentrate, chromate conversion coating for aluminium and its alloys. It provides excellent corrosion protection and promotes superior paint adhesion and flexibility. The coating produced complies with the military Specification MIL-C-5541C. Alukoat TCP is suitable for immersion, spray or wipe applications.

Accelerator

Specially formulated product to ensure the iron levels in a phosphate solution are kept at a level to ensure the fast and even phosphate coatings on parts. This product will maintain the iron levels as well as acceleratethe phosphate speed to keep the quality of the phosphated parts at their highest.

Chemcoater 532 SP

CHEMCOATER 532 SP is designed primarily for the Pre-treatment of zinc and its alloys such as galvanized steel and zinc based die casting prior to painting. It may be used where a certain amount of steel is processed with the zinc. Chemcoater 532 SP may be used in the quench water after hot dip galvanizing to obtain a base for subsequent painting.

Chemcoater 550

CHEMCOATER 550 is designed for zinc phosphating of iron and steel surfaces prior to painting or oiling. Galvanized steel and zinc die-castings can also be processed in mixed production with steel.

Phoskro Accel 111

PHOSKRO ACCELERTOR 111 is a powder additive used in Phoskro zinc phosphatising baths that increases the deposition rate and decreases the coating weight and grain size of the phosphate deposit by removing all soluble iron from the bath.

Phoskro Accelerator 111 (Liquid)

PHOSKRO ACCELERTOR 111 (Liquid) is a liquid additive used in Phoskro zinc phosphatising baths that increases the deposition rate and decreases the coating weight and grain size of the phosphate deposit by removing all soluble iron from the bath.

Phoskro Fix 300

Phoskro Fix 300 is a powdered, water-soluble chemical used to prepare a solution for conditioning ferrous metal surfaces when more dense, uniform and fine crystalline phosphate coatings are desired. It is particularly effective in preventing the coarse, irregular coatings often occurring on surfaces previously cleaned in strong alkaline solutions or pickled in acid solutions. Phoskro Fix 300 is frequently effective in producing finer grained, more uniform phosphate coatings on galvanized steel. As the zinc alloys used in galvanizing vary, production tests will indicate the degree of effectiveness of Phoskro Fix 300.

Phoskro Fix 800 Bucket

Phoskro Fix 800 is a liquid surface conditioning additive used to activate steel, zinc coated steel and aluminium prior to zinc phosphating.

Phoskro TC30

Phoskro TC31 is a tricationic phosphating process for steel, galvanised and alloy coated (Zn/Ni) steel. It produces a micro-crystalline coating of manganese containing, zinc phosphate. Phoskro TC31 has the following properties: · Produces a micro-crystalline, uniform layer · Suitable for immersion or spray applications · Runs at low temperatures · Produces very low quantities of sludge · Excellent corrosion protection · Prepares the surface for subsequent coatings · Suitable for control with automatic control equipment.

Phoskro Z-4130

PHOSKRO Z-4130 is a liquid zinc phosphate specifically designed for spray and immersion applications for mixed metal operations. It is well adapted to continuous or intermittent processing of either steel, or a combination of steel, galvanized steel, zinc and cadmium surfaces. PHOSKRO Z-4130 is also suitable for use on 3CR12, stainless steel. It is applied in conventional immersion processing equipment having 5 or more stages. PHOSKRO Z-4130 produces an exceptionally fine-grain, microcrystalline coating on steel and zinc that provides excellent paint adhesion and resistance to corrosive conditions, as evidenced by salt spray and humidity testing. Compared to a common zinc phosphate, PHOSKRO Z-4130 calcium modified zinc phosphate coating offers superior resistance to detergent (alkaline) solutions, and is preferred as a pre-paint base for washing machines and similar equipment. It is also superior to a common zinc phosphate when used to “anchor” electrophoretic ally applied paint. The smooth PHOSKRO Z-4130 coating reduces paint consumption without affecting the gloss of organic finishes, PHOSKRO Z-4130 will deposit a minimum coating weight of 1,5 – 4,0 g/m².by immersion.

Acitrol 88

Acitrol 98

Derust 5

KROME IRON FIX is a specially formulated product for the removal of iron and other metals from acid solutions typically used in pickling baths in the galvanising, electroplating and anodizing industries. KROME IRON FIX is suitable for use in the following acids and acid blends: · Hydrochloric · Phosphoric · Sulphuric · Nitric · Nitric and Ammonium Bifluoride · Nitric and Phosphoric · Sulphuric and Phosphoric · Nitric and Hydrofluoric · Sulphuric and Hydrofluoric KROME IRON FIX is used in conjunction with a simple filtration system to remove the insoluble metal complex formed during use. DERUST 5 is a Phosphoric acid based single step Degreaser and Deruster for all metals. It can be used by immersion or hand wash. A clear water white liquid containing phosphoric acid, detergents and inhibitors. This product leaves a light weight phosphate coating on the part to increase the corrosion protection of the substrate.

Descale S

Phoskro PA 10S

our products and solutions

raw material

At Krome Metal Chemicals (PTY) Ltd, we understand the importance of using high-quality raw materials in the manufacturing process. Our commitment to excellence starts with sourcing the finest raw materials available in the market.

We have established partnerships with trusted suppliers globally, allowing us to keep up with the latest trends and advancements in raw materials for the metal finishing industry. Our team of experts works closely with our partners to ensure that we stay updated on the newest products and services.

By utilizing the highest quality raw materials, we can deliver exceptional results to our customers. Our strict quality control procedures guarantee that only the finest raw materials are used in our products, ensuring optimal performance and customer satisfaction.

acetic acid

RAW

Ammonia CP

RAW

Ammonia Ind/Comm

RAW

Ammonium Acetate 98%

RAW

Ammonium Biflouride

RAW

Ammonium chloride

RAW

Borax Pentahydrate

RAW

caustic lye

RAW

chromic acid

RAW

copper sulphate

RAW

Deionised Water

RAW

Distilled Water

RAW

Hydrochloric Acid CP

RAW

Hydrochloric Acid Ind

RAW

nickel sulphate

RAW

Nitric Acid 55-60% Ind

RAW

Nitric Acid 55-66 C.P

RAW

phosphoric acid

RAW

Pot.PermanganatePharma

RAW

Potassium cyanide

RAW

Potassium Hydroxide

RAW

Potassium permanganate

RAW

Sodium Chloride Coarse

RAW

Sodium Cyanide

RAW

Sodium hypophosphite

RAW

Sodium Metabisulphite

RAW

Sulphuric Acid CP

RAW

Sulphuric Acid Ind/Com

RAW

Zinc Chloride Tech

RAW

our products and solutions

stainless steel

Stainless steel is a vital material in various industries, known for its exceptional corrosion resistance, durability, and aesthetic appeal. At Krome Metal Chemicals (PTY) Ltd, we recognize the significance of stainless steel and offer a range of specialized solutions tailored specifically for this versatile material.

Our extensive portfolio of stainless steel chemicals and processes include cleaners, pickling solutions, passivators, and inhibitors. Our formulations are designed to remove impurities, enhance surface finishes, and protect stainless steel against corrosion, ensuring long-lasting performance and visual appeal.

Backed by a team of seasoned chemists and engineers, we offer technical support and guidance to help you optimize your stainless steel finishing processes. From selecting the appropriate chemicals to troubleshooting and process improvement, we are here to assist you every step of the way.

E-Polish 400

E-Polish 400 is a blend of acids and proprietary chemicals, which may be used without further dilution for electropolishing of metals. The polishing system is applicable to both Stainless Steel (200, 300, 400 series) and steel of varying carbon content. E-Polish 400 produces a reflective, smooth, bright surface on the substrate, when operated at optimum conditions of current density and voltage. Following electropolishing in E-Polish 400, stainless steel is passive, thus enhancing corrosion resistance of the component. A separate passivation step is thus not usually required in the process sequence. E-Polish 400 can be used as a debarring procedure, where mechanical debarring is undesirable or inadequate. The precision dimensions of critical parts are maintained when electrochemical debarring is employed. Internal stresses (compressive and tensile) are partially removed during electropolishing.

K-Pass SS

K-Pass SS is a unique blend of chemicals which are used primarily for etching and passivating Stainless Steel

K-Prep 340

K-PREP 340 is a weld scale remover and enchant for use on stainless steel and similar alloys.

Descale 3CR

DESCALE 3CR is a nitric acid based product, which when diluted in water, pickles and removes heat treatment scale and rust from 3CR12 steel.

K-Etch SS

K-Etch SS is an etchant for use on stainless steel and similar alloys prior to powder coating.

Ebonite SS Bag

Due to the fact that the operation temperature of the solution is above the boiling point of water and the danger of eruption of the bath exists if water is added improperly, it is important that the entire contents of these operation instructions be thoroughly read and understood before attempting to make up or operate an EBONITE SS blackening bath. EBONITE SS is an alkaline, oxidising – type blackening compound, which produces black coatings on stainless steel and high alloy steels normally difficult to blacken. Ebonite S.S. solutions produce a mixed oxide – sulphide black coating by simple immersion. The dimensional changes involved are in blackening are extremely small, being less than 0.25 microns. The thickness of the coating ranges from 1.5 – 2.5 microns. EBONITE SS is supplied as a powder, which is dissolved in water to make the operating solution.

our products and solutions

Waste Water/ Cooling Towers / Effluent

Waste water, cooling towers, and effluent management are critical aspects of industrial operations that focus on effectively handling and treating water used in manufacturing processes. This includes the proper management of waste water generated during production, the cooling towers used for heat dissipation, and the treatment of effluent before its release into the environment.

Our products for waste water, cooling towers, and effluent treatment undergo rigorous testing and comply with industry standards.

Our waste water treatment chemicals are designed to effectively remove contaminants, pollutants, and heavy metals from industrial wastewater. We provide advanced formulations that ensure compliance with environmental regulations while promoting sustainability and water conservation.

For cooling tower treatment, we offer a comprehensive range of chemicals that prevent scale formation, control corrosion, and inhibit microbial growth. Our cooling tower treatment programs are tailored to meet the specific requirements of your system, ensuring optimal efficiency and longevity.

Effluent treatment is another crucial aspect of industrial operations, and we provide specialized chemicals to address effluent management challenges. Our solutions help in the removal of pollutants, organic compounds, and other harmful substances from effluent streams, enabling you to meet regulatory standards and minimize environmental impact.

Krome Water Flocc

KROME WATER FLOCC a high molecular weight, liquid flocculant, used to coagulate particles in fine suspensions and colloids. It offers the advantage of direct application, thus eliminating clumsy (and expensive) mixing equipment and reducing the handling problems associated with dry powder and emulsion polyacrylamide flocculants. This product has been successfully applied for clarification of washing water in the treatment of mining raw materials such as hard coal, rock salt, sand, gravel and clay. It also has application in the metal producing and processing industries and the chemical industry as a whole.

Flocbuilder PA 611

Flocbuilder PA 611 is a high molecular weight, liquid flocculant used to coagulate particles in fine suspensions and colloids. It offers the advantage of direct application, thus eliminating clumsy (and expensive) equipment and reducing the handling problems associated with dry powder and emulsion polyacrylamide flocculants. Whilst Flocbuilder PA 611 contains a proprietary stabilizer, the shelf-life of the product can be enhanced by storing in a cool environment, out of direct sunlight. Please note we do not use any Epichlorohydrin at any stage in the manufacture of our flocculants.

Flocbuilder PA 911

FLOCCBUILDER PA 911 is used mainly for flocculation of mineral and hydroxide type solid particles and colloids.This product has been successfully applied for clarification of washing water in the treatment of mining raw materials such as hard coal, rock salt, sand, gravel and clay.It also has application in the metal producing and processing industries and the chemical industry as a whole.

K Eflox 016

K-EFLOX 016 is an anionic flocculent supplied as a free flowing granular powder. Dosage depends on application but normally lies in the range 2 g to 200 g per Tonne of dry substance flocculated.

SO PA 911

SO PA 911 is used mainly for flocculation of mineral and hydroxide type solid particles and colloids.

Caustic Lye

RAW

Hydrogen Peroxide 50%

RAW

Soda Ash Dense

RAW

Sodium Hydroxide 45%

RAW

Sodium Hypochlorite

RAW

White Hydrated Lime

RAW

our products and solutions

wire industry

Phosphate is a chemical compound used in wire drawing to improve lubricity and reduce friction. It is applied to the wire before it is drawn through the die, which is a process of reducing the diameter of the wire. Phosphate is applied in a liquid form, usually a solution of sodium or calcium phosphate, and is designed to form a thin coating on the wire. This coating helps to reduce the friction between the wire and the die, which allows for smoother, faster wire drawing.

The use of phosphate in wire drawing is beneficial for several reasons. It helps to reduce the amount of heat generated during the drawing process, which can lead to a more consistent and uniform wire diameter. It also helps to reduce the wear and tear on the die, which can reduce the cost of wire drawing. Additionally, phosphate can help to improve the surface finish of the wire, making it more aesthetically pleasing.

Overall, phosphate is an important part of the wire drawing process, as it helps to reduce friction and improve the overall quality of the wire. It is an essential component for achieving a consistent and high-quality wire diameter.

Koppercoat 300 BUCKET

Koppercoat 300 is a powder chemical, used in conjunction with a copper sulphate and sulphuric acid solution to produce an adherent, bright, metallic copper coating on clean, rust and scale-free steel surfaces. The coating, along with the usual lubricants, increases die life and permits faster drawing. The Koppercoat 300 process is applied in a simple immersion process without the use of any electric current.

Phoskro 44-60/2

Phoskro 44-60/2 is an additice for the phoskro 450. this additive is used to adjust the free and total acid of the solution.

Phoskro 450

PHOSKRO 450 is a liquid chemical process which produces an outstanding quality zinc-iron phosphate coating on steel to facilitate the cold mechanical deformation of the metal. This is made possible by the lubricant absorbing properties of the phosphating coating. PHOSKRO 450 is operated using conventional immersion equipment. The coating reduces friction encountered in such operations as cold extrusion on steel, and the drawing of wire and tubing, ironing, necking, nosing, upsetting, etc.

Phoskro KRL

Phoskro KRL is an additive for a Phoskro KMU solution. This additive is usedt to maintain the free and total acid ratio as well as the zinc levels in solution. This is an easy to use additive that maintains the product at optimum levels for use.

Wirekoat AL125

Wirekoat AL-125 is a granular chemical that is readily soluble in water and is used to produce a drawing Lubricant and coating compound bath which tightly adheres to metal surface. WIREKOAT AL 125 bath is Applied by simple immersion. The lubricity obtained by the combination of drawing and coating properties of WIREKOAT AL 125 results in Maximum productions with minimum rejects in wire drawing, tubes drawing and other cold working Operations. Users of WIREKOAT AL 125 take pride in their lime-free mills and point to their more uniform Results with better die life, particularly on continue type machines. WIREKOAT AL 125 is suggested for wire drawing processes that must be easily cleaned, in the multiple Drafting of high and low carbon rod, and mechanically descaled low carbon rod. It has many applications for Drawing ferrous and non-ferrous wire and gives a nice bright finish. It may be used for dry or wet drawing. The dried film also protects the work from rusting during in-process storage.

our products and solutions

WORKSHOP

SO Clean-P20

SO CLEAN-P20 is a multi-purpose degreaser that can be used for the cleaning of exterior surfaces of transport vehicles, including aircraft, boats, ships and road tankers.It can also be used for cleaning interior surfaces of vehicles and aircraft, metal working equipment, printing presses and in the food industry. Is a powerful floor cleaning product

SO SD510

This product has been successfully applied for clarification of washing water in the treatment of mining raw materials such as hard coal, rock salt, sand, gravel and clay.

Eco Kleen

BLACKENING PROCESS FOR IRON AND STEEL

Our products Are

Your solution

Anodising

Electroplating

Galvanising

Lubricants

Powder Coating

Raw Material

Stainless Steel

Waste Water, Cooling Towers, Effluent

Wire Industry

Workshop

Anodising

Anodising Bath

CLEANERS

COLOURING

DE-SMUT

ETCHANTS

sEALING

TIN COLOURING

Alupress 22

Salmix AL-300

Aluclean 500

Aluclean Liquid

K-Soak 180

Krome Deep Black SW805

Krome Mineral Gold SW-814

Desmut K

Alupress 44

Etchal AL 2000

Alumseal 1000

Supreme Seal CS800

Inhibitron AL-3000

anodising bath

cleaners

colouring

de-smut

etchants

sealing

tin colouring

Electroplating

Acid Copper

Acid Zinc

Activation / Pickles

Alkaline Copper

Alkaline Zinc

Brass

Bright Chrome Plating

Chrome Plating

Cleaners

Copper Wire Tinning

Cyanide Zinc

Electrolytic Cleaners

Gold

Hard Chrome

Nickel

Rack Coating

Raw Material

Silver

Silver Plating

Steel Blackening

Strippers

TIN

Top Coats

Trivalent Conversion

Vibrator / Deburring

Zinc Nickel Alloy Plating

Zinc Passivations

Zincate

Copper Sulphate High Purity

Cupri AC 510 Part A

Cupri AC-510 RTU

Ammonium Chloride No-Anticaking

Oracle AZ/SB Brightener

Oracle AZ-50 Brightener

Oracle AZHT Brightener

Potassium Chloride

Potassium Chloride

K-Acid Salts

Copper Cyanide H.P.

Powder
Coating

Raw
Material

Stainless
Steel

Waste Water,
Cooling Towers, Effluent

Wire
Industry